Slimline Case for Greaseweazle v4.1

This is a handy 3D printed cover case for the Greaseweazle 4.1, i.e. the newer model with a USB-C connector. The case is available in PLA material, in many different colours.

The board easily snaps into place, and with the cover closed, every pin and connector is easily available, so no need to open and close the case.

The Greaseweazle board and cables are available as separate listings or add-ons. You might also take a look at the larger case containing both Greaseweazle board and a 3.5" floppy drive in one box.

Note about colours:

• A1200 Beige / Off-White is our best attempt at matching the (non-yellowed) shade of off-white/beige of the Amiga 600/1200 machines. While a 100% match is likely impossible to find, this comes very, very close.
• Glow-in-the-dark Green is a very light colour in the daylight, and it glows a faint green in the dark.
• Semi-Transparent is (like the name implies) not fully transparent, but you can see the contour of the board, sort of like through a matte filmed window.
• In general, the colour examples shown here might be slightly off from the actual product. Photographing colours and representing them accurately across various very different and very unknown screens is hard, if not impossible.